Updating cubex duo firmware to 1.07

updating cubex duo firmware to 1.07

updating cubex duo firmware to 1.07

- Updated Material Profiles - version 7 - Enhancements to part quality for ABS and PLA - Fix bug where Print Jet 1 was always used for drawing the internal hatch structure in features that should be using Print Jet 2 or Print Jet 3. - There have been instances where the "Build" button on the "Build" dialogue is not available. The "Build" dialogue is now resizeable so that the "Build" button is ...

The Firmware update process seems to work better now. If you have problems uploading the .hex firmware file thru the web, here is the CubeX V1.07.hex file you can copy onto your local desktop and then upload it from there. CubeX V1.07.hex

 · This video walks you through the firmware update process for the CubeX 3d printer Cube X STL to CubeX software Windows: https://drive.google.com/file/d/0BwlO...

 · Firmwareupdate

 · The .cubeX file is encoded so it cannot be read, but: The CubeX 1.07 software (not current 1.08 version) creates by accident an unencrypted .bfb file (readable in notepad) in the same folder it puts the CubeX build file. So you can look at the CubeX code file and compare. Here is a link to download the CubeX 1.07 software. (anybody can install ...

The firmware gets installed / updated on your CubeX. For that the CubeX has to be connected via USB cable to a computer that has internet access. There is a link in the blog to the latest user manual that shows the steps how to update the firmware. Reply Delete. Replies. Reply. Unknown October 3, 2013 at 9:12 AM. I installed the new 1.05 software today and the weight seems to be a lot more. In ...

 · I as well had no issue with upgrading firmware to 1.093 via usb cable that came with it. Windows 10 as well. Followed Smok's website directions. Not one hiccup. Kentasticsuber. May 10, 2016 #12 I as well had no problems either I just followed the instructions and bada bing 180 watts plus firmware is up to 1.097 now.It fixed a bug with the temp control. DED420. Silver Contributor. Member …

archive, launch the executable file inside and follow the instructions to update the firmware. Do not disconnect the USB cable and do not turn off the FDM-DUO. Once the update is completed, turn off and on the FDM-DUO. 3 FPGA firmware update There is no update to do for the FPGA firmware.

tom, i had the same problem on a new cubex single just removed from the packing; turns out the ribbon that connects the USB board to the main board was disconnected at the main board. i had to remove the bottom plastic platform to access the main board and reconnect the ribbon. once this was done the firmware update went through without a problem.

Hmm okay, thanks for your reply, I'll stay at 1.07 firmware. By the way, i heard that you build some site that selling stuff for cubex customize, may i know it ? Thank you hugues. On Wednesday, September 17, 2014 1:47:22 PM UTC+7, Hugues wrote:Never tried the 1.08 as I didn't know it exist. But I wouldn't try ! The 1.07 works great with KS

updating cubex duo firmware to 1.07 ⭐ LINK ✅ updating cubex duo firmware to 1.07

Read more about updating cubex duo firmware to 1.07.


The only reason people get lost in thought is because it's unfamiliar territory.

The trouble with car payments is that they sometimes continue running after the car does.

Raising kids is like building buildings- -you've got to spend time with them.